3.5" LCD Display Portable Meter Test Equipment GPS Module Single Phase RSM
Product Summary
Portable Single Phase Reference Standard Meter MCSP01 1) 3.5" LCD display 2) Accuracy class: 0.2 or 0.5 (clamp mode) 3) Measuring range: 80V-288V/clamp 10A, 50A, 60A, 100A, 300A optional 4) Power & Energy test, Demand test, Error test, Dial test 5) RS232 communication with PC to upload the test data ...
Product Custom Attributes
3.5" Portable Meter Test Equipment
,GPS Portable Meter Test Equipment
,RSM Portable Meter Test Equipment
Basic Properties
Trading Properties
Product Description
Portable Single Phase Reference Standard Meter MCSP01
1) 3.5" LCD display
2) Accuracy class: 0.2 or 0.5 (clamp mode)
3) Measuring range: 80V-288V/clamp 10A, 50A, 60A, 100A, 300A optional
4) Power & Energy test, Demand test, Error test, Dial test
5) RS232 communication with PC to upload the test data
6) GPS/GPRS module (optional)
7) DLMS reading (optional)
Technical Index
| Current Measurement | |
| Range | clamp on CT: 10A, 50A, 60A, 100A, 300A, etc… optional |
| Accuracy | 0.2 or 0.5 class |
| Voltage measurement | |
| Range | 80-312V |
| Accuracy | 0.2 |
| Frequency measurement | |
| Range | 45-65HZ |
| Error | ≤ 0.02HZ |
| Phase angle measurement | |
| Range | 0-360 deg. |
| Error | ≤0.1 deg. |
| Other parameters | |
| Power supply | 240V±30% |
| Power Consumption | less than 2VA in current circuit and less than 8VA in voltage circuit |
Features
1) Test all kinds of electronics/electromechanical single phase meter at site
2) Test and display of basic error, voltage, current, power, power factor, energy, harmonics, etc
3) Dial test / demand test
4) PC software for uploading test data then analyze then generate report
5) Alpha numeric keyboard
6) Optical sensor with clamp or attaching disc to hold & count LED/LCD signal pulse
7) Snap switch to be used as an alternative of scanner/sensor head
8) Clamp-on CT with electronic compensation
9) Display error and store total energy including harmonics
10) LCD display
11) High Resolution Display
12) Two kinds of operation modes (auto & manual)
13) Indication with the display under below conditions:
a. over current (more than 120%)
b. over voltage (more than 130%)
c. low voltage (less than 70%)
14) Store 200 & more test results
15) Interface to connect external printer
16) PC management software of uploaded the test records
Function Menu Interface:
1) Meter Parameter Setting 2) Error Test 3) THD 4) Data Save & Inquiry
5) System setting 6) CT ratio test 7) Demand test 8) Dial test 9) others
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
